Multi-Wire In-Line Drawing Machine (for
enamelled wire machine)
sponsored by PAN-PIONEER
CO., LTD.
-
1.] Main specification:
-
1.1.) Type: Multi In-Line Drawing
Machine(5-Line x 8 dies)
1.2.) Application: For enamel wire production process as in-line process machine
1.3.) Inlet wire size range: 1.2-1.8mmφ
1.4.) Final wire size range: 0.5-1.0mmφ
1.5.) Speed of final capstan: 0-150m/min
1.6.) Inlet wire size (Supply wire size)
-
1.6.1.) 0.5 Final size ＜ 0.7 : Use 1.2mmφ wire supply
1.6.2.) 0.7 Final size 1.0 : Use 1.8mmφ wire supply
1.7.) Number of Lines: 5 lines/machine
1.8.) Number of drawing dies draft: 8 dies for each line
1.9.) Machine reduction
-
1.9.1.) First, Middle pass: 20%
1.9.2.) Final: 17.2%
1.10.) Power supply: 3 phase, 380V, 50Hz
1.11.) Capstan surface material
-
1.11.1.) First, Middle pass: Tungsten carbide coating
1.11.2.) Final pass: Ceramic coating (if possible)
1.12.) The number of machines: Total 4 sets
-
1.12.1.) Wiring direction from right hand to left hand: 2 sets
1.12.2.) Wiring direction from left hand to right hand: 2 sets
1.13.) Drawing dies: Use drawing die size as follows
Die's out of diameter × thickness:
Size 0.3-0.8mm: 25mm × 7mm
Size 0.81-1.0mm: 25mm × 10mm
Size 1.01-1.29mm: 25mm × 15mm
Size 1.30mm up: 30mm ×15mm
-
1.14.) Driven motor: HP AC motor + AC vector type Inverter
1.15.) Other specifications:
All other detail machine specifications must be followed
-
2.] Composition of machine:
-
2.1.) In-Line drawing machine................................................1 set
2.2.) HP AC motor + Encode..............................................1 set
2.3.) AC Inverter (Japanese Brand or equivalent)..................1 set
2.4.) 1/25 Worm gear..............................................................1 set
2.5.) HP Ring blower ............................................................1 set
2.6.) Operation panel
2.7.) Control panel
2.8.) Electrical cable wiring in the machine
2.9.) Lubricant circulation piping in the machine
[link exchange page]